IPS Block SSL certificates¶

Prerequisites¶

• Always upgrade to latest release first. See Initial Installation & Configuration and/or upgrade to latest release: System->Firmware: Fetch updates

• Minimum Advisable Memory is 2 Gigabyte and sufficient free disk space for logging (>10GB advisable).
• Disable all Hardware Offloading Under System-Settings->Networking

To start go to Services->Intrusion Detection

User defined¶

Select the tab User defined.

Create a new Rule¶

Select to add a new rule.

Get fingerprint of website¶

It is relatively easy to find out the SSL fingerprint of a website. For demonstration we will block facebook and use Firefox to determine the fingerprint.

Open your browser and go to https://facebook.com when loaded click on the lock next to the address : .

Now you will see something similar to:

Click on the arrow ( > ) and then Select More Information Now open the certificate details and you will see something that looks like this:

Copy the SHA1 certificate fingerprint (A0:4E:AF:B3:48:C2:6B:15:A8:C1:AA:87:A3:33:CA:A3:CD:EE:C9:C9).

Paste this into the new rule:

Select the Action (Alert or Drop):

Add a description:

And click Save changes

Enable Intrusion Detection & Prevention¶

To enable IDS/IPS just go to Services->Intrusion Detection and select enabled & IPS mode. Make sure you have selected the right interface for the intrusion detection system too run on. For our example we will use the WAN interface, as that will most likely be you connection with the public Internet.

Apply configuration¶

First apply the configuration by pressing the Apply button at the bottom of the form.

Clear Browser Cache and test¶

Since your browser has cached the ssl certificate you will need to clear your cache first. After that you can test and will see the following in Alerts: